I wired it to the Trans fuse as Kevin suggested. It appears that either
his '99 318 is wired differently from mine, or that line to the A/C hot
wire is critical in the setup to have it keyed off the ignition.
I'll be buying a test light along with new crimp connectors probably
tomorrow so I can finish the wiring and find a good fuse to use.
David Axmann wrote:
>
> To turn the fan off when the ignition is off, you have to hook up the 12
> volt fan power lead to a source that also turns off when the ignition is
> off (like the radio) and not a constant 12V source (like lights). If
> not, the fan will run until the temp drops below the specified mark.
> Most stock electric fans do run after the engine is off, but since the
> Daks don't it shouldn't be a problem.
> David
-- -andyhttp://home.twcny.rr.com/andylevy/ --- andylevy@bigfoot.com ------------------------------------------------------------- "I spilled spot remover on my dog. He's gone now..." --- Steve Wright -------------------------------------------------------------
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:31 EDT