JB,
I'm running a 180 degree Robert Shaw thermostat. P#> 330-180 and yes it's
a bitch to put in. You use the old gasket and you have to file a little notch
in the rim of the new thermo to match the old one. you will find a little
spot on the inside of the gasket that fits this notch. there is just not much
working room. (2) 8mm bolts and (1) 8 mm allen wrench drain plug is all there
is to it.
There are no plug wires. it's coil over plug. Run autolite 3923's gapped
at .040 only.
SEMIHEMI01 (Bill C.) 2001 QC, 4.7L, 5spd. 3.55 LSD, K-N Cool-Air, SilBlades,
10w-30 MOBIL 1, 180 T'STAT
<A HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:31 EDT