Re: Re: RE: Re: Gen III Durango axle to a Gen II Dakota Re: Jon

From: Jon Smith (jon@fast4x4.net)
Date: Thu Sep 14 2000 - 22:24:29 EDT


Could one not drill a sensor boss into the housing and attach the exciter
gear between the pinion and carrier? That way you could keep the ABS...
_______________________
   Jon Smith--Raleigh, NC
        jon@fast4x4.net
       www.fast4x4.net

> From previous experience, the spider gears tend to shatter under power.
The
> auburn, even though they make one for the 8 1/4, it does not fit all
years.
> The axles are also held in by c-clips which tend to be less than reliable.
> also, the smaller the ring gear, the smaller the pinion, which makes it
> weaker, but not by much. 8 3/4 will fit as you said, but you will have to
> figure how to disable the rear anti-lock.
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 99.52 mph
> 360ci, 5-spd, 4.11 LS, Ram-air



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:35 EDT