Thanks
Doug Fedeli
Mark Kuzia wrote:
> Yes, for now the wheels are 6" wide, if I don't get new wheels this winter,
> I will have them widened to 7 1/2". The seats required a 1" x 2" square
> tube to be bolted to each mount then drilled for the seats. Not too hard to
> do. The tube also added needed height to the seats, they would have been too
> low without it.
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 99.52 mph
> 360ci, 5-spd, 4.11 LS, Ram-air
> ----- Original Message -----
> From: "Doug Fedeli" <rdf@eznet.net>
> To: <dakota-truck@buffnet.net>
> Sent: Sunday, September 17, 2000 1:06 AM
> Subject: Re: DML: THE DAK IS BACK! New pics with new paint!
>
> > Looks great. That's what I call a sleeper. Are the wheels the 6" wide ones
> or
> > did you have them widened? Did the Viper seats bolt right in?
> >
> > Doug Fedeli
> >
> > Mark Kuzia wrote:
> >
> > > I finaly Got My Dak back last Wednesday! WOO HOO!
> > >
> > > I had to wash it twice already! Black paint is a pain to keep
> > > clean.......but it sure looks good when it is. I also have my new wheels
> on
> > > it as well.
> > >
> > > http://people.mw.mediaone.net/flyboy01/main.html click on the "FASTDAK"
> > > button or the picture of the black Dakota.
> > >
> > > Hopefully I will be at the Sept 24 Mopar show helt at the Sterling
> Heights
> > > Stamping Plant on 15 mile and Van Dyke.
> > >
> > > Let me know what you think of the new look.
> > >
> > > Mark Kuzia
> > > flyboy01@mediaone.net
> > > http://people.mw.mediaone.net/flyboy01/home.html
> > > 1995 Dakota 13.79 @ 99.52 mph
> > > 360ci, 5-spd, 4.11 LS, Ram-air
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:38 EDT