RE: RE: IAT on 4.7? Bernd

From: Stlaurent Mr Steven (STLAURENTS@mctssa.usmc.mil)
Date: Tue Sep 19 2000 - 16:16:48 EDT


So how can you trick the motor Bernd?

-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com

 -----Original Message-----
From: bernd@texas.net [mailto:bernd@texas.net]
Sent: Tuesday, September 19, 2000 8:01 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: IAT on 4.7?

It should. Check on the runners on the intake manifold for a little brass
sensor. That should be it. (I haven't looked at a 4.7L yet but that's a
pretty common place for the sensors.)

- Bernd

> I have noticed this when the engine is under 170 it runs a whole lot
faster
> than running at stock 190-195.
>
> -------------------------------------------
> Steven St.Laurent
> Test Engineer
> Test Branch, GSD, MCTSSA
> MARCORSYSCOM, USMC
> 760-725-2506 (DSN 365-2506)
> Work:mailto:stlaurents@mctssa.usmc.mil
> Home:mailto:saint1958@home.com
>
>
> -----Original Message-----
> From: Donny M Hayes [mailto:donny_m_hayes@yahoo.com]
> Sent: Tuesday, September 19, 2000 12:23 PM
> To: dakota-truck@buffnet.net
> Subject: DML: IAT on 4.7?
>
> Just wondering, but does the 4.7 engine have an IAT
> sensor? I have noticed that when my engine is
> cold/cool it runs SO much better than when fully
> warmed up...trying to come up with some way to trick
> the pcm into thinking the engine isn't so hot....
>
> any other tips tricks from the 4.7 guys/gals out
> there?
> So far I've added a Gibson exhaust, and a homemade K&N
> FIPK.
>
> thanks,
> Donny M Hayes
>
>
> =====
> Donny M Hayes
> donny_m_hayes@yahoo.com
>
> __________________________________________________
> Do You Yahoo!?
> Send instant messages & get email alerts with Yahoo! Messenger.
> http://im.yahoo.com/
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:40 EDT