RE: Spark plug wire sleeves

From: Ronald Wong (ron-wong@home.com)
Date: Wed Sep 20 2000 - 20:49:06 EDT

Next message: The Man From Utopia: "Re:DML:some cops just.."
Previous message: Chris Lambert: "Tracking Dakota Build"
In reply to: jay & dana: "Spark plug wire sleeves"
Next in thread: Jon Smith: "Re: Spark plug wire sleeves"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Should twist right out of there Jay.

Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of jay & dana
Sent: Wednesday, September 20, 2000 5:41 PM
To: DML
Subject: DML: Spark plug wire sleeves

Thanks for the advice guys. What would be the best way to remove those
round plug wire heat shields for the exhaust manifold? Remove plugs wires
and pull them out (if possible) with pliers or ???

Thanks
Jay

Next message: The Man From Utopia: "Re:DML:some cops just.."
Previous message: Chris Lambert: "Tracking Dakota Build"
In reply to: jay & dana: "Spark plug wire sleeves"
Next in thread: Jon Smith: "Re: Spark plug wire sleeves"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:41 EDT