Did you find out what type of material its made out of..............and what
material he is using for the coupling to the TB. Is it home depot sewer pipe
coupling....or high temp silicone.
>From the pic, .......it has a pretty wicked weld seam all the way
around.....and you cant really see the inside bends.......is it aluminized
steel that was bent by a muffler shop......or is it mandrel bent.
I am not talking smack........but these are all the questions, and little
comments I put up from all the side line coaches.......so now its my turn to be
the critic.
I think it might be worthwhile to try to get a pic of his kit from a different
angle.
and another thing........where the filter is sitting......its presenting the
end cap of the filter to the air flow.
Tony
Tanner & Beth Sammons wrote:
> I would seriously consider it.
> ----- Original Message -----
> From: <Y2KDakuda@aol.com>
> To: <dakota-truck@buffnet.net>
> Sent: Tuesday, September 26, 2000 6:28 AM
> Subject: DML: new 4.7 intake
>
> > I got an e-mail back from the guy that owns the truck in the photo with
> the cool air intake for the 4.7. He sell the kit for 125.00 plus S&H I am
> working out some details with him let me know if you want one I can ask him
> about a groub buy. he is the link to the photo again
> >
> > http://216.147.104.171/Y2K/members/KEITHD/keith4.jpg
> >
> > Chris Lambert
> > President Dakota USA
> > http://www.dakotausa.com
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:53 EDT
