Austin,
Yes, the slots are cut in the flywheel. They are located at different
degree settings between the V6 and V8.
Rich - Ashburn, VA
-----Original Message-----
From: DICEMAN469@aol.com [mailto:DICEMAN469@aol.com]
Sent: Thursday, September 28, 2000 12:29 AM
To: dakota-truck@buffnet.net
Subject: DML: Attention to any V8's that changed their own clutch
I need to know about the flywheel in relation to the crank position sensor.
Are the slots to trigger the sensor incorporated into the flywheel or is
there a separate piece that bolts into the front of the flywheel? I want to
retain the v6 flywheel but don't know if its possible.
-Austin
Vipertruck
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:58 EDT