I have one already comparing the stock vs. MP TB on my website.
http://lonestar.texas.net/~bernd/Photos/Truck/Double_View.jpg
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Jon Smith
Sent: Sunday, October 01, 2000 12:48 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: Re: Throttle Bodies
well take some pics ;) this is one of the things that I believe Jules' is
the only one to do. As far as I know he is the only one that doesn't crank
them out, rather he does them 1 at a time by hand. Whether or not it
justifies the extra expense.... well... I'll leave that comment up to anyone
that has owned/dynoed the different TB's.
If I had a source to get loaners from each of the different TB's I'd gladly
do the testing. But as I recall there was an interest in doing such several
months ago, with little or no interest from the TB producers.
_______________________
Jon Smith--Raleigh, NC
jon@fast4x4.net
www.fast4x4.net
>
> You should see the polish jon on the bores on my SB250 (V6) Throttle Body.
> Smooth as silk!
>
> - Bernd
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:44 EDT
