ok, already got the bottom bolts out... just pull the top forward till it
pops off? I was in the process of seperating it by using my fingers as a
wedge, but the need for food called a time-out
_______________________
Jon Smith--Raleigh, NC
jon@fast4x4.net
www.fast4x4.net
> There's two bolts on the bottom/front of the timing cover. Remove those
and
> pry the cover towards the front of the engine bay from the top. To
re-seal,
> just clean up the surface and add a bead of silicon to the oilpan. (I've
> removed it three times already without any leaks.
>
> - Bernd
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:44 EDT