My Milodon Gear Drive was around $300+. A good timing chain (Dbl-Row - True
Roller) is still less expensive.
Hughes has a nice billet set which I gots me eye on. ;)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Kenneth Berntsen
Sent: Sunday, October 01, 2000 3:31 PM
To: 'dakota-truck@buffnet.net'
Subject: DML: RE: timing chain wear
Hey Bernd
What's the difference in cost of the Magnum Performance chain vs. that gear
setup you got? I'm figuring if it ain't much I might as well go with that.
Looking at the sag in Jon's chain I figure mine is prolly looking the same
after 98K miles.
-----Original Message-----
From: Jon Smith [mailto:jon@fast4x4.net]
Sent: Sunday, October 01, 2000 2:20 PM
To: dakota-truck@buffnet.net
Subject: DML: timing chain wear
posted some pics on my site... keep in mind ~94k miles on this stocker...
www.fast4x4.net/pics.htm is the direct link. someone gimmie an ID on the
plug in the 1st pic... appears to be an access hole? looks similar to a
tiny oil drain plug, but what purpose does it serve?
_______________________
Jon Smith--Raleigh, NC
jon@fast4x4.net
www.fast4x4.net
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:44 EDT