1972 on up.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Ronald Wong
Sent: Monday, October 02, 2000 7:10 PM
To: dakota-truck@buffnet.net
Subject: RE: DML: 180 degree thermostat
I knew I read about one like that somewhere. I think that will fit all the
Magnum engines. Correct me if I'm wrong.
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Gary Bower
Sent: Monday, October 02, 2000 5:00 PM
To: dakota-truck@BUFFNET.NET
Subject: Re: DML: 180 degree thermostat
What I found and sent for is: CST Inc Box 667 Mt Carmel IL 62863 $17.50 for
p/n 72008 Failsafe thermostat for 3.9L.
Any failures and it gets stuck in the open poition. Expensive, but some
insurance that you could keep going in case of failure.When your in ahurry
to get somewhere-millin dollar deal on the line....(when things usually seem
to malfunction).
Maybe stupid, but another way to 'bulletproof' your transportation.
----- Original Message -----
From: Crit Bennett <crit@engineer.com>
To: <dakota-truck@BUFFNET.NET>
Sent: Monday, October 02, 2000 6:12 PM
Subject: RE: DML: 180 degree thermostat
> I'm looking for the same info. I'd like to put in a new T-Stat this
> weekend. Anyone have the Stant part number or someone else's?
>
> Crit
>
> ------------------------------
>
> Date: Mon, 2 Oct 2000 10:00:21 -0400
> From: sedwards@SUNGARDRS.COM
> Subject: DML: 180 degree thermostat
>
> Does anyone have the part number for a Stant 180 degree thermostat for a
00
> QC
> 4.7? Both Prep Boys and Advance auto parts do not have it listed in their
> system.
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:46 EDT