Stant has a HD for 6.30 (in 160, 180, & 195) at Pepboys. It is a 54MM wide
thermo.
---------------------------------------------------
Steve St.Laurent
2000 Dakota 4.7L, CC, Soon to be Supercharged
1999 Chebby gone in 2003
1993 Suzuki Tracker (Geo) 1.6L
COMING SOON
2003 Aspiring for a V-10 GTS-R
2003 Dodge Dakota 5.7 Hemi R/T
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of IXLR8RT@aol.com
Sent: Saturday, October 07, 2000 12:35 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Need information on 4.7 Thermostat
In a message dated 10/7/2000 2:01:21 PM Central Daylight Time,
cyberlaw@earthlink.net writes:
> Where is the Thermostat on the 4.7 and how is it replaced? I remember a
> thread in that and there being some confusion (it was different from a
> typical LA engine). What was the resolution? I must have missed it.
Did
> anybody post a clear walkthrough? The gasket seems an issue, can you
just
> use RTV?
>
I was looking thru the 2000 factory service manual yesterday at work.
It shows the t-stat located at the block, where the lower hose goes to it.
FSM say's to drain fluid by removing the lower hose (the 4.7 t-stat design
is
different from pervious designs, they have it on the outlet side-not the
inlet side).
Unbolt 2 bolts that hold the t-stat housing on. Remove stat and reinstall
new
unit. The 4.7 stat uses an O-ring instead of a gasket. No RTV is needed.
I haven't done mine yet, that's why I was reading up on it.
Someone else on the list has done it, let's hear from whoever it was.
The factory stat number is different from the 4.7 to the 318/360 number.
Someone posted the Robert Shaw number, I don't remember it off hand.
Good luck,
Jeff C.
"There's no such thing as too much cam, just not enough motor."
--David Freiburger
__________________________________________________________
Jeff Capuzzi
00' Dakota Sport RC 2wd, IB with 4.7 V8, 5 speed, and 3.55 gears.
Decal free, 255/60-15 Firestone's, loud pipes, homemade cold air intake
system, homemade traction bar's, and more on the way...
__________________________________________________________
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:54 EDT