I'm interested, but I can't find the details on Summit. I would like to
take advantage of the Crane System purchase. Please send me URL where you
found it.
Thanx,
Hugh
----- Original Message -----
From: "Alex Harris" <aharris@signcast.com>
To: "DML" <dakota-truck@buffnet.net>
Sent: Monday, October 09, 2000 5:44 PM
Subject: DML: Feedback on Crane Cams ignition?
> Shopping for ignitions in the Summit catalog, and Crane Cams has a system
> that looks good on paper -- Fireball HI-6S with PS-91 Coil, harness
> included, for $153.95 (vs. $180 for MSD 6A/Blaster SS/Harness combo). This
> seems to be a system targeted at the same class as the MSD 6A. The Crane
> components bought separately are about $190, so the package deal looks
> pretty good cash-wise if it's a good ignition. The only technical
difference
> I can spot is that the Crane is inductive discharge, while the MSD is
> capacative discharge. What's the diff?
>
> Anybody try these or have any data on their quality?
>
> HI-6S Ignition System Specifications
>
> Operating voltage 6 to 18 volts, reverse polarity protected, negative
ground
> only.
> Current draw 5.0 amps maximum at 7,000 RPM.
> RPM operating range 8,000 RPM (can be extended to in excess of 10,000 RPM
on
> 4 cylinder engines).
> RPM limiter range 1,000 to 5,000 RPM for stage rev limit. 4,000 to 8,000
RPM
> for maximum rev limit (can be doubled for 4 cylinder engines).
> Multiple spark duration Approximately 20 degrees crankshaft rotation below
> 2,000 RPM. Maximum 12 sparks per sequence.
> Primary voltage output 450 volts (inductive discharge).
> Spark duration 2,800 microseconds at 2,000 RPM.
> Trigger input Module trigger (12 volt square wave).
> Dimensions 5-1/2"L x 3"W x 1-1/2"H, 2-3/8 lbs.
> Operational limit 8,000 RPM continuous at 185 degrees F.
>
> http://www.cranecams.com/ignition1/electoc.htm
>
>
> - Alex/StL
> '00 RC SLT V6 5-Speed
> Autolite 3923's, Homebrew K&N
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:55 EDT