Re: Ford 19# injectors are here, any tips for the job?

From: Kyle Kozubal (grndak4x4@home.com)
Date: Tue Oct 10 2000 - 16:58:01 EDT


> They're here!!! I basically know about the bleeder, throttle linkage,
etc.,
> but do I lube the o-rings with anything before installing? I'm thinking
white
> lithium or motor oil. Any advice?
> They're from Jegs @ $193/set, came in a white Ford Racing box with a
> hand-written p/n M9593-C302, they're blue with a 4-hole nozzle. Called
Jegs
> because of the hand-written #, but they said Ford outsources them &
they're
> not always the same color (fellow DMLer Greg has orange ones). I plan to
do
> this job Saturday, weather permitting. Any advice would be appreciated.

My FMS #19 are also orange and they all should be orange as well. Odd! I
used a very very light coating of automatic transmission fluid for the
orings and they slipped right in. It is an extremely easy ntstall. Good
Luck.
Kyle
93 Dakota 4x4 V6



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:56 EDT