I got mine sand blasted, then white cadmium plated. Makes 'em look like
aluminum.
-=Mike
DONKEYJAKE@aol.com wrote:
> I just bought a set of Flowtech headers and the shops resident pro told me
> that they would come shipped with a film on them. He said that it was to
> protect it during shipping and I should sand it off before installing them.
> Most people just put them right on, crank it up, and this film burn off. I
> was told this is wrong. After sanding and cleaning, a high temp paint should
> be applied followed by about an hour of baking at 400 degrees in the oven.
> This is supposed to extend the life of the heads. So, my question (finally)
> is, is this right? Any feedback as always is appreciated, and any ideas are
> welcome. Thanks.
>
> JAKE
> 97 CC 4x4 5.2l
-- -=Mike Kuriger 1991 Isuzu Impulse RS 1.8 2000 Dodge Durango SLT 4x4 4.7
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:58 EDT