Thanks Chris, BTW they dyno'd alot of vehicles that weekend. The Dakota show
section was right beside the dyno. We got to see alot of vehicle get up
there. One guy I met there had a '99 RT CC Black, he had a MP air intake, MP
headers, MP exhaust, MP computer, he pulled 220 hp, and 315 ft lbs TQ. Not
sure why they didn't select him over some of the others?? I thought it was
more impressive than some of the others. The RT they did show in the mag
pulled, I think 207 hp, and 277 tq. and the magazine said it was stock. I
have seen about 2 or 3 stock RT pull and all three were around 190 to 195
hp, that 207 was pretty impressive for stock?? if it truly was. The Daytona
4 cyl with 25 lbs of boost that pulled 305 hp through the transaxle was flat
out unreal, thats gotta be pushing 100 hp per cylinder!
100 HP PER CYLINDER< BAWWWWW HAAAAAA HAAAAAAAAAA
__________________________________
Matt--VA--Y2K-HEMI `00 Sport Plus RC
4.7L 5spd. 9 1/4 3.92 LSD,Hoosiers
Homemade air intake,T-Bars, Spring clamps,
Mobil 1,3" Flowmaster cat-back,Mike Leach PCM
14.48 @ 92.40 MPH 216 RWHP/292 RWTQ
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-----Original Message-----
From: Y2KDakuda@aol.com [mailto:Y2KDakuda@aol.com]
Sent: Tuesday, October 17, 2000 7:44 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Mopar Muscle (or Action, I forget) Mag
Thats Matt way to go Matt
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:07 EDT