doh, doh, and DOOOOHHHHH!!!!! that was meant to be a 46re....
_______________________
Jon Smith--Raleigh, NC
jon@fast4x4.net
www.fast4x4.net
'95 Dakota 4x4 318 CC auto
----- Original Message -----
From: Ronald Wong <ron-wong@home.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, October 19, 2000 12:22 AM
Subject: DML: RE: Re: Re: 96 Auto. Trans. Q.--RE RE RE
> I think the 45RFE's only on the new 4.7's. I don't think there was a 45
> before that.
>
> Ron
> 00 SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Jon Smith
> Sent: Wednesday, October 18, 2000 9:11 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: Re: 96 Auto. Trans. Q.--RE RE RE
>
>
> '96s use the 45re, due to OBD II and the addition of an electrically
> controlled tranny ( i think) :)
> _______________________
> Jon Smith--Raleigh, NC
> jon@fast4x4.net
> www.fast4x4.net
> '95 Dakota 4x4 318 CC auto
> ----- Original Message -----
> From: Tim <magnum318@uswest.net>
> To: <dakota-truck@buffnet.net>
> Sent: Wednesday, October 18, 2000 8:50 PM
> Subject: DML: Re: 96 Auto. Trans. Q.--RE RE RE
>
>
> >
> > I have a '95 4x2 with the V-8 transmission. You should have a 46RH
trans,
> > which is also known as the A-518 transmission or the older standard of
> > chryslers' model 727 trans with an "overdrive" tail. Hope this clears up
> > your question
> > Tim R.
> >
> >
> > ----- Original Message -----
> > From: "Bob Tom" <tigers@bserv.com>
> > To: <dakota-truck@buffnet.net>
> > Sent: Wednesday, October 18, 2000 4:08 PM
> > Subject: DML: 96 Auto. Trans. Q.
> >
> >
> > > Does anyone with a '96 5.2L 4x2 auto. know if their tranny is
> > > a 44RE or not? Thanks in advance.
> > >
> > > Bob
> > >
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:11 EDT