DML Digest wrote: DML Digest Wednesday, October 18
2000 Volume 04 : Number 2719The subjects discussed in
this digest are:==========Re: DML: DML Where Is
Everyone From ?????RE: DML: DML Where Is Everyone From
?????DML: #%&* sparkplugsDML: Re: spark plugsRe: DML:
HyperTech PCM (attn Jay)DML: Hotrod showDML: 4.7 Idle
Oscillation Problem... The Dealer (long)Re: DML: 2000
Quad Cab-DML: Re: #%&* sparkplugsDML: RE: GIBSON GROUP
BUYDML: RE: #%&* sparkplugsDML: Redline productsDML:
4.7 Idle Oscillation Problem... The Dealer (long)
AgainDML: I am Sorry.....TB SpacerDML: Project
1HiDakDML: I Am Sorry..TB SpacerRe: DML: Redline
productsDML: Fw: from r/t listRe: DML: RE: Free Offer
from Gibson ExhaustDML: Re: RE: Re: Gibson/MagnaFlow
"FrankenPipe" Exhaust [Grady]DML: durango liftRe: DML:
V6 intake manifoldRe: DML: I Am Sorry..TB SpacerRE:
DML: Where Is Everyone From?????Re: DML: RE:
Personalized Plates...Re: DML: Trans seal UPDATE , new
trans on the way!!!!!!!!!!!!!!!DML: Speed Grills fro
gen IIIDML: RE: Personalized Plates...RE: DML: RE: RE:
Personalized Plates...Re: DML: durango liftRe: DML:
Texas RainRe: DML: A500 Band Adjustment help (42RE)Re:
DML: RE: Personalized Plates...Re: DML: Cecil County
Dragway meetDML: New Air IntakeDML: OoopsDML: Re: 96
Auto. Trans. Q.--RE RE RERe: DML: Speed Grills fro gen
IIIRe: DML: RE: ABS looooong po'boy intake installed
on 4.7 - wow!DML: RE: Carfax......questionDML: RE: RE:
RE: Personalized
Plates...----------------------------------------------------------------------Date:
Wed, 18 Oct 2000 15:31:41 +0300From: "Bruce Bridges"
Subject: Re: DML: DML Where Is Everyone From
?????Seth,Its a non mag 318... The heads were 70 318
castings. Its got 1.98" sstuliped intakes, 1.6 ss
exhaust. (wierd intake size eh?) The porting wasnttoo
extensive, but whatever he did works great! This guy
likes the stock318 heads over the X or W2 heads as a
starting point for a hot street motor.I guess I cant
complain since the 318 has low end grunt like my R/T +
6700rpm capability!Bruce- ----- Original Message
-----From: Seth Hollander To: Sent: Thursday, October
19, 2000 12:20 AMSubject: Re: DML: DML Where Is
Everyone From ?????> Yeah, MOPARs aren't cheap, but
that's what makes them> the underdog. Hemi or not,
your cuda sounds nice, Is> that an older 318 or does
it have the magnum heads?> Man, if you put that kind
of money into your> R/T...whewww Seth> --- Bruce
Bridges wrote:> > Seth,> > No hemi... The Barracuda
runs a "truck series" spec> > 318 punched out .060> >
(after extensive sonic testing)... Its a fun combo.> >
Big blocks in E bodies> > compromise the handling a
bit too much for my> > driving style these days (I> >
hate looking "backwards" at speed...). Its a bit> >
faster than the R/T is,> > but Ive got a lot into the
motor/trans combo and its> > lighter to boot. Dak> >
content:> > To go fast my Cuda has:> > ported heads:
$1100.00> > Full race block prep with ARP everything
$800.00> > modified forged pistons $400.00> > mild cam
(not for long) $200.00> > roller rockers $350.00> >
etc etc etc> > cost (approx): $3200.00 for the motor
(what the> > heck, I had some severance> > money and I
wanted to see how well a 318 can run!)> > ET about
14.0 @ 97 (traction limited right now,> > busted
Posi)> > You can go just about as fast in a Dakota
that> > weighs about 1Klbs more for> > the same
money!> > Feel better? Mopars have never been cheap
to> > modify!> > Bruce> >> > ----- Original Message
-----> > From: Seth Hollander > > To: > > Sent:
Wednesday, October 18, 2000 9:52 PM> > Subject: Re:
DML: DML Where Is Everyone From ?????> >> >> > >
Tight...R/T and you have a cuda too...now I'm> > >
jealous...don't tell me it has a hemi. I'll keep> >
my> > > eyes open...are you sportin a DML sticker???>
> > Flometrics...I think I know the area you are> >
talkin> > > about> > > --- Bruce Bridges wrote:> > > >
Seth,> > > > Look for a deep amethyst R/TCC, or a
light> > > > gold/yellow 72 barracuda or a> > > > dark
green Jensen Interceptor (loud). The> > > > Flometrics
sign can be seen from> > > > the coast highway in
Solana Beach, just across> > from> > > > Moreland
choppers. East> > > > of the highway on the other side
of the railroad> > > > tracks!> > > > Bruce> > > >
----- Original Message -----> > > > From: Seth
Hollander > > > > To: > > > > Sent: Wednesday, October
18, 2000 7:46 PM> > > > Subject: Re: DML: DML Where Is
Everyone From> > ?????> > > >> > > >> > > > > Cool, I
take my girl for a cruise over there> > every> > > > >
once in a while...Maybe I'll see ya driving> > > > >
round...got my DML sticker on, so I'll give> > you> >
> > the> > > > > thumbs up when I cruise by....Seth> >
> > > --- Bruce Bridges > > wrote:> > > > > > Seth and
Steve,> > > > > > North County Solana Beach!> > > > >
> Bruce> > > > > > ----- Original Message -----> > > >
> > From: Seth Hollander> > > > > > > > To: > > > > >
> Sent: Wednesday, October 18, 2000 6:46 PM> > > > > >
Subject: Re: DML: DML Where Is Everyone From> > > >
?????> > > > > >> > > > > >> > > > > > > Cool, San
Diego... What part? I'm driving> > a> > > > white> > >
> > > Gen> > > > > > > II in Rancho Bernardo. Seth> >
> > > >> > > > > >> > > > >> > > > >> > > > >> >
__________________________________________________> >
> > > Do You Yahoo!?> > > > > Yahoo! Messenger - Talk
while you surf! It's> > > > FREE.> > > > >
http://im.yahoo.com/> > > >> > >> > >> > >
__________________________________________________> >
> Do You Yahoo!?> > > Yahoo! Messenger - Talk while
you surf! It's> > FREE.> > > http://im.yahoo.com/>
>>>>
__________________________________________________> Do
You Yahoo!?> Yahoo! Messenger - Talk while you surf!
It's FREE.>
http://im.yahoo.com/------------------------------Date:
Wed, 18 Oct 2000 15:40:13 -0700 (PDT)From: Seth
Hollander Subject: RE: DML: DML Where Is Everyone From
?????Good deal. It will be nice to recognize some
hometownMOPAR brothers. Seth- --- Stlaurent Mr Steven
wrote:> I will keep my eye for you. If you see a
Dakota GEN> III Patriot Blue CC> with DamilerChrysler
sticker under the Dodge and> with a V8 emblem on the>
tailgate that's me.> >
-------------------------------------------> Steven
St.Laurent> Test Engineer> Test Branch, GSD, MCTSSA>
MARCORSYSCOM, USMC> 760-725-2506 (DSN 365-2506)>
Work:mailto:stlaurents@mctssa.usmc.mil>
Home:mailto:saint1958@home.com> > > -----Original
Message-----> From: Seth Hollander>
[mailto:dakotademon94@yahoo.com] > Sent: Wednesday,
October 18, 2000 10:38 AM> To:
dakota-truck@BUFFNET.NET> Subject: RE: DML: DML Where
Is Everyone From ?????> > Hey I'm up out there
too....I usually go surf at> Tamarack....I suck
though....my girl lives in> Vista...You'll probably
see me cruising> around....Seth> --- Stlaurent Mr
Steven > wrote:> > North County area Escondido to
Oceanside is my> > usually running area.> > Oceanside.
> > > > -------------------------------------------> >
Steven St.Laurent> > Test Engineer> > Test Branch,
GSD, MCTSSA> > MARCORSYSCOM, USMC> > 760-725-2506 (DSN
365-2506)> > Work:mailto:stlaurents@mctssa.usmc.mil> >
Home:mailto:saint1958@home.com> > > > > >
-----Original Message-----> > From: Seth Hollander> >
[mailto:dakotademon94@yahoo.com] > > Sent: Wednesday,
October 18, 2000 8:47 AM> > To:
dakota-truck@BUFFNET.NET> > Subject: Re: DML: DML
Where Is Everyone From ?????> > > > Cool, San Diego...
What part? I'm driving a white> > Gen> > II in Rancho
Bernardo. Seth> > --- Stlaurent Mr Steven> > > wrote:>
> > San Diego, California> > > > > > BIOTECH COUNTRY &
FAST CARS> > > > > >
-------------------------------------------> > >
Steven St.Laurent> > > Test Engineer> > > Test Branch,
GSD, MCTSSA> > > MARCORSYSCOM, USMC> > > 760-725-2506
(DSN 365-2506)> > >
Work:mailto:stlaurents@mctssa.usmc.mil> > >
Home:mailto:saint1958@home.com> > > > > > > > > > > >
> > >
__________________________________________________> >
Do You Yahoo!?> > Yahoo! Messenger - Talk while you
surf! It's> FREE.> > http://im.yahoo.com/> > >
__________________________________________________> Do
You Yahoo!?> Yahoo! Messenger - Talk while you surf!
It's FREE.>
http://im.yahoo.com/__________________________________________________Do
You Yahoo!?Yahoo! Messenger - Talk while you surf!
It's
FREE.http://im.yahoo.com/------------------------------Date:
Wed, 18 Oct 2000 15:43:07 -0700From:
fdedip@whale-mail.comSubject: DML: #%&* sparkplugsI
was just changing my sparkplugs, and one of the wires
came apart when I was prying it off the plug- again!
No more spare wires for me. Anybody know how I can get
the #&*!!! things off without this happening again? I
used the dielectric grease...FlipCare2 make the world
greener !------------------------------Date: Wed, 18
Oct 2000 15:56:34 -0700From: "jay & dana" Subject:
DML: Re: spark plugsAnother question for you guys,I am
now convinced on the autolite coppers but was
wondering if the 3924'swould be a better application
for my truck as it is basically stock and Idon't "rat
around" very much? I was thinking about the 5224's but
some onthe list said," what's the difference between a
318 truck engine and a carengine?", which the 39's are
for (car engine).ThanksJay- -----Original
Message-----From: jdurling@mindspring.com To:
dakota-truck@buffnet.net Date: Tuesday, October 17,
2000 7:31 PMSubject: DML: spark plugs>I waited a few
weeks to try this out before I brought up
an>observation/question about the autolite 3923 plugs.
When I changed my>plugs I also changed my cap and
rotor. From this I have noticed that the>truck runs
smoother and has more power on tap. I have changed my
cap and>rotor a couple of times before and have never
seen the increase that I>have in power and the
smoothness of the engine. I pulled out a set of>10k
old truck plugs and they were burning perfectly fine
from their>color. I pulled out one of the 3923's a
couple of days ago and they>looked just as good. I
know a set of new plugs can help out alot but not>ever
like this. To top all of this off I have seen a
definate>improvement in mileage (14mpg to 16mpg in
town). Maybe this is from the>new plugs but in the
last couple of sets I have used (including>replaceing
the factory for factory) there has never been such
a>noticalbe improvement. Sure, it ran alot better at
first but after a>week or two at most it was back to
it's usual self. This has just been>surprising to me
that's all. Wo knows maybe there was something
wrong>from the begining and a colder plug has always
been whats needed what>ever it is I sure am
glad.>>Jeff Durling>'96 RC
Sport>------------------------------Date: Wed, 18 Oct
2000 15:59:27 -0700From: "jay & dana" Subject: Re:
DML: HyperTech PCM (attn Jay)Thanks for your response
Dave. I'll be waiting for your findings. TTYLJay-
-----Original Message-----From: Dave Thede To:
dakota-truck@buffnet.net Date: Tuesday, October 17,
2000 7:45 PMSubject: Re: DML: HyperTech PCM (attn
Jay)>The part # is 972300. I'll try and dyno the truck
before and after.>>Dave Thede>1997 Sport+ Flame Red CC
V8/5-spd 4x4 3.55>Homemade Ram Air>K&N FIPK
clone>Gibson split
cat-back>http://members.xoom.com/tnadoman>>>>_________________________________________________________________________>Get
Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.>>Share information about
yourself, create your own public profile at
>http://profiles.msn.com.>------------------------------Date:
Wed, 18 Oct 2000 18:57:27 -0400From: Preacher Subject:
DML: Hotrod showAnyone in the NC area planning (or
want to plan) to see the Big car show at Lowe's
speedway in Charlotte?It's this Friday, Saturday and
Sunday.Preacher------------------------------Date:
Wed, 18 Oct 2000 18:47:38 -0400From: Chris Lambert
Subject: DML: 4.7 Idle Oscillation Problem... The
Dealer (long)OK, I have been accused of being an
&*^hole to the dealer.... but first lets go back to
the beginning... At about 12,000 Miles I take my truck
to the dealer because I busted a tranny seal at the
track and the truck was leaking tranny fluid...
Figured that while it was there I would have them look
at the idle oscillation these 4.7's are kinda
notorious for... well that and just plain going
fast... so anyway they check it all out and what not
and then they find the autolite plugs I put in... well
they were like can't have that, you have to change the
plugs ore we are gonna charge you to, they have to be
champions... I was like what if you change the plugs
and they make no difference on the problem, do I still
have to pay for them, and he was like yes....
whatever.... so i changed teh plugs and made a new
appointment to have the plugs changed... so that day
comes and after over an hour they say that they are
sorry but they don't have the proper plugs for the
engine... Now I am upset but hey whatever... then
today they finally had the plugs, changed them and
since there are no codes in the computer they tell me
there is no problem with my truck, this from a guy
that had NEVER ridden in my truck, the service manager
none the less, tells me there is no problem and I have
to live with it... all the while I knew that the
foreman was out sick today and he should have been the
one looking at my truck... but they didn't just say
that they were sorry and that I could come back
another night and have this guy look at it... no
instead they say that there is nothing wrong... NOW I
AM A BIT PEEVED... I didn't want to argue in the
dealership in front of other customers but at least
admit that there is a problem and you don't know how
to fix it... so i asked the guy if he wanted to see it
for himself... I took him for a ride and he was still
saying nothing is wrong... I was like when you have 8
cylinders and the thing wants to die under no load
there is a problem.... but since there was no code in
the computer he was convinced that this is how
chrysler designed it... I was like fine then it is
that way for all chrysler standards... he said yes...
so I said lets take one for a little test drive to
see... he tells me there are no standards on the lot,
i corrected him and said that there were and he
quickly stated what he means that there were 4.7l
standards... so finally after an hour of
talking/arguing with him outside he tells me to stop
by at my convenience and the foreman will be taken off
whatever he is on to go for a ride with me... to say
the least I am livid right now....Sorry had to get it
out.... so now what should I do...ChrisOh and the
truck now has 15k miles on it and they will not give
me a loaner because they do not know if they can fix
it (even since there is no problem) and if they can't
they are out the car rental and all the diagnosis
time... after all it might not be under warranty he
said... I looked at the truck and pointed from one end
of the truck to the other and said... see those
bumpers I am still under the bumper to bumper warranty
and the engine is most definitely between the two
bumpers... plus I am covered to 100k miles... he
didn't like that
remark...HELP!!!!!**************************************************************************************'00
CC, Packin a 287 Magnum, 5-sp, Gibson Duals, Traction
Bars, SpringClamps, Magnum Front Plate, Quick D
Intake, "Smoke Em" Decal, PaintIn bed-liner, More to
comehttp://www.intense99dak.com/chris.htm**************************************************************************************------------------------------Date:
Wed, 18 Oct 2000 19:00:54 -0500From: Aurelio Lopez
Subject: Re: DML: 2000 Quad Cab-Wasn't this whole
"ridiculing of other clubs" subject covered some
months ago.Check the archives if you feel a need go
over this topic again.Aurelio- --'00 QC Sport
PlusIntense Blue Pearlcoat3.9L V6 - 5spd. - 4x2Sport
Plus / HD Service / Trailer Tow grpsam/fm/cd w/
infinity soundDML
profile:http://www.twistedbits.net/WWWProfile/dakota/UwHhKURBBnMA6Jack
Paulson wrote:> I think there shoul be list for each
color!>> --- jay & dana wrote:> > I totally agree as
to one list, otherwise Ron or> > others might hold
back> > secrets that would apply to my truck (engine)
and> > give them away to guys &> > girls with
different cab configurations (hehehe).> > You wouldn't
do that> > would you Ron?> >> > Jay> >> >
-----Original Message-----> > From: Stlaurent Mr
Steven> > > > To: 'dakota-truck@buffnet.net'> > > >
Date: Monday, October 16, 2000 11:04 AM> > Subject:
RE: DML: 2000 Quad Cab> >> >> > >Next it will be a
list just for 4.7 hemi owners,> > like R/T, like QC,
like> > RC,> > >like CC...so where does it end. What
we need is> > just one list and one club> > >and build
from there.> > >> > >www.dodgedakota.com.> > >> >
>Just my .02 cents.> > >> >
>-------------------------------------------> >
>Steven St.Laurent> > >Test Engineer> > >Test Branch,
GSD, MCTSSA> > >MARCORSYSCOM, USMC> > >760-725-2506
(DSN 365-2506)> >
>Work:mailto:stlaurents@mctssa.usmc.mil> >
>Home:mailto:saint1958@home.com> > >> > >> > >
-----Original Message-----> > >From: David A> >
[mailto:dodgedakotaquadcab@hotmail.com]> > >Sent:
Monday, October 16, 2000 9:58 AM> > >To:
dakota-truck@buffnet.net> > >Subject: Re: DML: 2000
Quad Cab> > >> > >First of all,IT IS A GREAT TRUCK...>
> >secondly,do yourself a favor...join the ONLY site>
> devoted to the QC..> > >> >
>"DodgeDakotaQuadCab@egroups.com"> > >> > >I am David
Digney,the List Moderator..> > >I invite you(or any QC
owners)to join my List...> > >Many members of the DML
belong too(Ron Wong/Don> > Mallett)> > >> > >> >
>>From: "WPG" > > >>Reply-To:
dakota-truck@buffnet.net> > >>To: > > >>Subject: DML:
2000 Quad Cab> > >>Date: Mon, 16 Oct 2000 07:51:11
-0500> > >>> > >>Okay guys and gals I'm soliciting
your opinions on> > the quad cab. Owners> > >>opinions
preferred but all welcome. I don't want> > to hear its
UGLY, that is> > >>your opinion but not what I am
looking> > for...smile. I am going to look at> > a> >
>>new 2000 sport 4.7 auto tonight after work. I'm> >
thinking about trading my> > >>99> > >>R/T that I have
had for a whole month. No that> > there is anything
wrong> > with> > >>my R/T but with a family I think
the quad would be> > a better vehicle for> > me.> >
>>> > >>Thanks,> > >>> > >>Paul Gottes> >
>>wpgottes@worldnet.att.net> > >>pgottes@paccar.com> >
>>> > >>> > >> >>
>_________________________________________________________________________>
> >Get Your Private, Free E-mail from MSN Hotmail at>
> http://www.hotmail.com.> > >> > >Share information
about yourself, create your own> > public profile at>
> >http://profiles.msn.com.> >>> =====> 2000 Quad Cab
4X4-Sport V-6 Automatic Sports Plus Package> 31X10.5
tires Limited Slip 3.55 Trailer Tow Group> HD Package
Skid Plates Added:Airaid air filter,Flowmaster 3
chamber,> Steel Horse Torneau cover, Autolite Double
Platinum Spark Plugs,> Removed air horns from Throttle
Boddy, added new TB bolts,> Cool Tape around air
filter and A/C tubes-Smyrna, Georgia_____NetZero Free
Internet Access and
Email______http://www.netzero.net/download/index.html------------------------------Date:
Wed, 18 Oct 2000 19:02:38 -0400From: "Chuck Robbins"
=== message truncated ===
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:11 EDT