Then you shouldn't have ANY problems whatsoever. Same way like on a SB
Chevy (or BB at that). Follow the instructions though and keep at least a
1/4 turn on the nut from "0 Lash".
Time: about 1 hour now but took 2 in the beginning.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of
Fast4x4Dakota@aol.com
Sent: Sunday, October 22, 2000 8:50 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: Roller Rocker installation tips?
How long did it take you guys who have the Roller Rockers to install them?
I've done this on Non Magnum engines and SBC's before.
Luke
1996 Black 4x4 Dakota, SLT CC SB, 318, 3" 2 Chamber Flowmaster cat back
exhaust, 9" open element Mr. Gasket Air cleaner, A-500 3.55 geared Peg Leg 8
1/4, 31 10.50 BFG Mud Terrains, Alpine CD player, Infinity Kappa Speakers.
Coming soon: E-Body 8 3/4" Rear axle, 3.55 gears, Detroit locker, 10"
Brakes,
and Moser Engineering custom alloy axles!
> That's most lame, uneducated answer I've heard on here in a
> long time. I guess the 24 hp & 40 ft. lbs. I gained from 1.7s
> and headers will really screw up my motor (some 15k miles later
> and still going strong).
>
> Sam '00 RT
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:19 EDT