Re: Re: 1.7 Crower Roller Rockers

From: mike d. (miggitymike@fast4x4.net)
Date: Tue Oct 24 2000 - 02:35:07 EDT

Next message: Will Coughlin: "Re: Re: Checker Auto Parts...Get real!"
Previous message: mike d.: "Re: almost, maybe, sorta kinda...."
In reply to: TommFern@aol.com: "Re: Re: 1.7 Crower Roller Rockers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

>>Hey Mike,
Does crower say that you must run the1.7s with guide plates? I run the 1.7s
without them. My rpm range is up to 6000rpm. I always thought you didn't
need
to run guideplates with them.Hmm?<<

they didn't say I HAD to, but they recommended it. Since the rockers are
self aligning, you really don't need to.... but since they came with the
kit, you might as well put em' on. They are MUCH beefier than the stockers
anyway, so I don't think it could hurt.

-miggity

slammed 88 Dakota --> 360 swap in progress!!
miggitymike@fast4x4.net
http://surf.to.Project13s

Next message: Will Coughlin: "Re: Re: Checker Auto Parts...Get real!"
Previous message: mike d.: "Re: almost, maybe, sorta kinda...."
In reply to: TommFern@aol.com: "Re: Re: 1.7 Crower Roller Rockers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:21 EDT