>From what Bruce posted:
3.76 Inches (Stock) = 95.5mm
4.00 Inches = 101.6mm
- Bernd
> What size is the new TB Billet for the 4.7 in MM?
>
> -------------------------------------------
> Steven St.Laurent
> Test Engineer
> Test Branch, GSD, MCTSSA
> MARCORSYSCOM, USMC
> 760-725-2506 (DSN 365-2506)
> Work:mailto:stlaurents@mctssa.usmc.mil
> Home:mailto:saint1958@home.com
>
>
> -----Original Message-----
> From: Bruce Bridges [mailto:bbridges@flometrics.com]
> Sent: Tuesday, October 24, 2000 10:26 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: 4.7 Air Intake Doomed
>
> Chris,
> F&B (Flometrics and Bridges) will be prototyping a Billet TB for the 4.7 in
> a couple of weeks. We are planning on increasing the inlet diameter of the
> TB to at least 4" (from the 3.26 stock..) This will require a new intake
> system or adaptor, which we will under take as well...We need a 4.7 truck to
> come on down to the shop for some prelim measurements and then install and
> dyno testing...about 2 weeks later... Discounted TB and etc, is all part of
> the deal!
> Takers?
> Bruce
> ----- Original Message -----
> From: <Y2KDakuda@aol.com>
> To: <dakota-truck@buffnet.net>
> Sent: Tuesday, October 24, 2000 7:55 PM
> Subject: DML: 4.7 Air Intake Doomed
>
>
> > Well sorry guys I have given up on my sorce for the new 4.7 intake. the
> guy
> > has not returned my e-mail and its not right to make people wait this long
> > for information. I just ordered the Z-Tube from Intense Performance it was
> a
> > little more but after some thought a much better product. Sorry again that
> i
> > couldn't come through for you guys but I tried it is his loss. If you
> still
> > want his product you can keep trying to e-mail him.
> > Thanks
> > Chris Lambert
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:24 EDT