nonono
The stock 4.7 plate diameter is 68mm! One big One! The OD of the TB (and the
inlet hose ID size is about 3.26"dia. We are going to increase that to 4"
or so to provide a properly shaped inlet....
Bruce
----- Original Message -----
From: <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, October 25, 2000 3:00 PM
Subject: Re: DML: RE: Re: 4.7 Air Intake Doomed
>
> From what Bruce posted:
>
> 3.76 Inches (Stock) = 95.5mm
> 4.00 Inches = 101.6mm
>
> - Bernd
>
> > What size is the new TB Billet for the 4.7 in MM?
> >
> > -------------------------------------------
> > Steven St.Laurent
> > Test Engineer
> > Test Branch, GSD, MCTSSA
> > MARCORSYSCOM, USMC
> > 760-725-2506 (DSN 365-2506)
> > Work:mailto:stlaurents@mctssa.usmc.mil
> > Home:mailto:saint1958@home.com
> >
> >
> > -----Original Message-----
> > From: Bruce Bridges [mailto:bbridges@flometrics.com]
> > Sent: Tuesday, October 24, 2000 10:26 PM
> > To: dakota-truck@buffnet.net
> > Subject: DML: Re: 4.7 Air Intake Doomed
> >
> > Chris,
> > F&B (Flometrics and Bridges) will be prototyping a Billet TB for the 4.7
in
> > a couple of weeks. We are planning on increasing the inlet diameter of
the
> > TB to at least 4" (from the 3.26 stock..) This will require a new
intake
> > system or adaptor, which we will under take as well...We need a 4.7
truck to
> > come on down to the shop for some prelim measurements and then install
and
> > dyno testing...about 2 weeks later... Discounted TB and etc, is all part
of
> > the deal!
> > Takers?
> > Bruce
> > ----- Original Message -----
> > From: <Y2KDakuda@aol.com>
> > To: <dakota-truck@buffnet.net>
> > Sent: Tuesday, October 24, 2000 7:55 PM
> > Subject: DML: 4.7 Air Intake Doomed
> >
> >
> > > Well sorry guys I have given up on my sorce for the new 4.7 intake.
the
> > guy
> > > has not returned my e-mail and its not right to make people wait this
long
> > > for information. I just ordered the Z-Tube from Intense Performance it
was
> > a
> > > little more but after some thought a much better product. Sorry again
that
> > i
> > > couldn't come through for you guys but I tried it is his loss. If you
> > still
> > > want his product you can keep trying to e-mail him.
> > > Thanks
> > > Chris Lambert
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:24 EDT