In a message dated 10/25/00 10:56:52 PM Central Daylight Time,
owner-dakota-truck@BUFFNET.NET writes:
> said you could get
> 416 cubes out of a 360. The crank retails for around $350, but the pistons
> would be pricier. I think the article said that someone was already
> modifying magnum truck engines with the new crank. This setup should be very
> doable, but it will involve custom computer programming, bigger injectors
> etc...
>
>
> Andre Mauboussin
> 95 Dak 14.3@96.6 street radials, no juice or sc
>
I am in the middle of doing this. Except I am going for 408 cubes. This way
I don't have to bore the block out by .060, which I was told is dangerous on
the Magnum blocks. The cylinder walls get really thin. So, rather than buy
a MP block with a .060 over bore, I am currently having mine bored out and
the 4.00 stroker crank put in with different pistons and pushrods to get 408
cubes, and I am trying to decide what blower I want to go with (paxton,
Vortech, Powerdyne). So hopefully I will be able to have it all bolted in
within the next month and a half. Hopefully. I'll keep everyone posted.
Will
96 Cylindrically Challenged (Soon to have a blown 408 stroked 360!!!) V-6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:25 EDT