Same here with code 37. Only happens with the MP PCM and it's not even a
valid code for my truck according to the FSM for the model year I have.
Ignore it.
Richard in San Antonio
On Mon, 30 Oct 2000 18:52:18 -0500 "Jon Smith" <jon@fast4x4.net> writes:
> forget the code 37... mine has done it since day 1 and seems to be
> limited
> to running the MP PCM. my codes always run 12, 37, and 55..
> (sometimes and
> EGR, but that aint nothin ;) )
> _______________________
> Jon Smith--Raleigh, NC
> jon@fast4x4.net
> www.fast4x4.net
> '95 Dakota 4x4 318 CC auto
> ----- Original Message -----
> From: <DICEMAN469@aol.com>
> To: <dakota-truck@buffnet.net>
> Sent: Monday, October 30, 2000 8:05 AM
> Subject: DML: Part throttle Solenoid
>
>
> > I'm getting a "37" error code which according to the book is a
> Part
> Throttle
> > Solenoid problem. The truck seems to run fine until a moderate
> full-throttle
> > run, afterwards in which the idle won't come down to normal idle
> (usually
> > around 1300 rpm at a stoplight in drive). Where should I begin to
> diagnose?
> > Also what does a converter sound like when it's shot? I'm
> getting this
> > strange what sounds like a rattling noise from inside the
> converter
> housing.
> > Truck runs great, just workin out the wrinkles.....
> >
> > -Austin
> > Vipertruck
> >
>
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:37 EDT