OK I got rid of the 37 diag code problem with a swap to the stock computer.
Now I got a new problem I need to solve. When I start the truck, it idles
normal, when I drive around it ides normal when I come to a stop. Now here's
my problem. If I'm doing highway speed and I accelerate with full throttle to
pass someone, the idle gets stuck at 1200 rpm even at a full stop in gear
with the brake applied. About 2k in neutral, and it won't go down for
anything. It trips no engine codes and if I turn the truck off then restart
it even without waiting, the idle goes right back to normal. This only
happens when I give it FULL throttle. I already changed the TPS and I'm going
to change the idle speed motor on the back of the TB next, but I don't think
this is the problem either. Anyone have any other suggestions??
-Austin
Vipertruck
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:38 EDT