Austin,
Since you went from a V6 to a V8, check the speed sensor circuit as well. (If
this is that case.)
- Bernd
> OK I got rid of the 37 diag code problem with a swap to the stock computer.
> Now I got a new problem I need to solve. When I start the truck, it idles
> normal, when I drive around it ides normal when I come to a stop. Now here's
> my problem. If I'm doing highway speed and I accelerate with full throttle to
> pass someone, the idle gets stuck at 1200 rpm even at a full stop in gear
> with the brake applied. About 2k in neutral, and it won't go down for
> anything. It trips no engine codes and if I turn the truck off then restart
> it even without waiting, the idle goes right back to normal. This only
> happens when I give it FULL throttle. I already changed the TPS and I'm going
> to change the idle speed motor on the back of the TB next, but I don't think
> this is the problem either. Anyone have any other suggestions??
>
> -Austin
> Vipertruck
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:38 EDT