In a message dated 10/30/00 3:40:03 PM Pacific Standard Time, jon@fast4x4.net
writes:
<< do you know what kind of headwork and what the cam specs are??
_______________________
Jon Smith--Raleigh, NC >>
West Side in Houston did the head work for MTI. Larger valves with full port
work. The heads flowed a very impressive 270/210cfm@500 lift. The cam is from
crane and has a 220ish duration@50. I was really impressed with the #s on the
heads. Give that motor some compression and a real cam and look out.
Tom(11s dak)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:04 EDT