Hi Ron
Jon said he used the vertical wire loom kit according to the catalog part
#50-756. You said you also used the Made For You wire looms but you were not
sure what Jon was talking about. By any chance would you have a part number
for the loom kit you used and if not do the ones you have attach to the
valve covers by removing the bolts or do they just fit on the wires
themselves?
Thanks
Jay
----Original Message-----
From: Ronald Wong <ron-wong@home.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Friday, November 03, 2000 4:15 PM
Subject: DML: RE: Re: RE: sparkplugs wire looms ATTN: Ron W
>Let's see, how do I answer all these questions? First of all, I removed my
>stock valve covers so I did what you don't want to do and believe me it was
>a pain! I installed the custom Mopar Magnum valve covers which includes
all
>new bolts and gaskets. Ok, enough about that. Your stock wire looms are
>made to fit stock wires (7 mm). Those looms can be removed without
removing
>the valve cover bolts. Just grab a hold of the plastic loom with a pair of
>pliers and yank. Watch out, don't hit yourself in the face because once
>they let loose, they let loose. I don't know about the ones Jon is talking
>about but even if you have to remove the bolts for new ones it shouldn't be
>a problem. The valve cover gaskets nowadays are rubber and steel and can
be
>reused. You're not going to take the valve covers off anyway, just take
>each bolt out and put a new bolt in. You should use a torque wrench when
>installing just to be on the safe side. I use the Made 4 You 7-8mm looms
>and it fits quite snugly and doesn't present a problem for the wires
>whatsoever.
>
>Ron
>00 SLT QC 4X2 5.9 46RE 3.92 LSD
>For modifications see my DML Profile
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:04 EDT