on 11/4/00 2:15 PM, jay & dana at jay&dana@telus.net wrote:
> Scott
>
> I don't know if you received my other message yet but I forgot to ask about
> the stock metal rings around the sparkplugs. By these do you mean the heat
> shields? From what I've read on the DML these suckers should be pulled out
> and thrown away.
>
> TTYL
> Jay
>
>
>> -----Original Message-----
>> From: Scott Quaranta <mquarantaca@earthlink.net>
>> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>> Date: Thursday, November 02, 2000 3:25 PM
>> Subject: Re: DML: Re: RE: sparkplugs wire looms ATTN: Ron W
>>
>>
>>
>>
>>> Hi Jay,
>>>
>>>
>>> The Magnacore 8mm wires just fit in the stock looms or you can get the
>>> mopar performance 7.5 mm. I have the Magnacores they are blue and fit the
>>> stock metal rings around the spark plugs nicely , aslo the have a slight
>>> angle on the boot so you can aim the plug wire, fit like stock and look
>> cool
>>>
>>>
>>> Scott
>>>
>>
>
HI Jay,
Magnacore is the manufacture , They have quite a following.
I personaly like to keep the heat sheilds.
Scott Q
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:06 EDT