Re: Gibson Headers

From: Michael Kuriger (michael@isuzu-mods.com)
Date: Mon Nov 06 2000 - 16:48:08 EST


craftsamn has an open end socket thingie that might work.

-=Mike

xjruss@excite.com wrote:

> I installed a set of Gibson headers on my Dak yesterday to go along with
> my Gibson cat-back exhaust. It was a major pain in the ass but I guess it
> was worth it. Engine pulls harder now. Also, the noise that the dealer
> kept telling me was pinging is now barely noticeable compared to what it was
> before. Had to remove passenger side fender well (plastic thing) to get the
> header into the engine compartment because it wouldn't fit between the a/c
> hardware. The biggest pain is that the design of the headers does not allow
> easy access to the header bolts. I had to use you a regular open end
> wrench, and there is no way you can torque them down with a torque wrench.
> Anyways, just thought I would share my experience.
>
> -Russ
> '99 CC SLT 4x4 V8
>
> _______________________________________________________
> Say Bye to Slow Internet!
> http://www.home.com/xinbox/signup.html

--
-=Mike Kuriger
1991 Isuzu Impulse RS 1.8
2000 Dodge Durango SLT 4x4 4.7
http://www.isuzu-mods.com
http://www.twistedbits.net/WWWProfile/dakota/NgFQdD9vkNHNg



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:07 EDT