In a message dated 11/9/00 9:07:53 PM Pacific Standard Time, jon@fast4x4.net
writes:
> at least I hope so :-) I decided to pull the manifold to see what's up...
> I must be getting used to these intakes, cuz 10min after I started I had
the
> blame thing off the truck =) There was oil between the head and the
> manifold gaskets, I did find that some of the manifold bolts were not tight
> like they should be.
Woo hoo, that's making time! So are you voulenteering to help me with my M-1
intake swap, ported head, and new cam install in my 4x4 1996 Dak? I'll drive
to see you for a weekend if you'll help, I'll buy ALL the beer too! :o)
Luke
1996 Black 4x4 Dakota, SLT CC SB, 318, 3" 2 Chamber Flowmaster cat back
exhaust, 9" open element Mr. Gasket Air cleaner, 52mm Ported TB, 3923
Autolites, A-518 / 46RE, 3.55 geared Peg Leg 8 1/4, 31x10.50 BFG Mud
Terrains, Alpine CD player, Infinity Kappa Speakers.
Coming soon: E-Body 8 3/4" Rear axle, 3.55 gears, Detroit locker, 10" Brakes,
and Moser Engineering custom alloy axles!
After that: Ported heads, M-1 intake, and R/T Cam (or maybe a Hughes one)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:14 EDT