does this work for premag engines?
mike
88 sport 4x4 V6
"Bernd D. Ratsch" wrote:
> Wes,
>
> All you really need to do is drill a 1/2" hole in the intake tube to install
> the IAT sensor. The best location I found though...the passenger side
> fender. You'll have to extend the wires but that's not a hard job at all.
> Don't forget to grab yourself a 1/4" Pipe Plug for the old IAT hold on the
> manifold. (Home Depot carries them.)
>
> http://lonestar.texas.net/~bernd/DakotaPics.htm - Check out the IAT
> Relocation Pics
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Wes Weems
> Sent: Monday, November 13, 2000 1:56 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Relocation of IAT sensor
>
> I was wondering if anyone had pictures of their modifications, or
> instructions on what I wuold want to do, to relocate the IAT sensor to be on
> the intake tube =)
>
> Wes
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:20 EDT