Wes,
All you really need to do is drill a 1/2" hole in the intake tube to install
the IAT sensor. The best location I found though...the passenger side
fender. You'll have to extend the wires but that's not a hard job at all.
Don't forget to grab yourself a 1/4" Pipe Plug for the old IAT hold on the
manifold. (Home Depot carries them.)
http://lonestar.texas.net/~bernd/DakotaPics.htm - Check out the IAT
Relocation Pics
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Wes Weems
Sent: Monday, November 13, 2000 1:56 AM
To: dakota-truck@buffnet.net
Subject: DML: Relocation of IAT sensor
I was wondering if anyone had pictures of their modifications, or
instructions on what I wuold want to do, to relocate the IAT sensor to be on
the intake tube =)
Wes
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:16 EDT