Re: Magnum head bolts!

From: Lenny (tendtherabbits@hotmail.com)
Date: Thu Nov 16 2000 - 16:58:02 EST

Next message: Ronald Wong: "RE: Viper/Dakota Map Modifier(build for 10 bucks)"
Previous message: Dakota31852@aol.com: "Re: Viper/Dakota Map Modifier(build for 10 bucks)"
Maybe in reply to: Robertsons: "Magnum head bolts!"
Next in thread: bernd@texas.net: "Re: Magnum head bolts!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

I would have used the sealant just to be safe. I think that most head bolts
do go into the coolant passageways.
Josh
00 CC V6

>From: "Robertsons" <jrobert@voyageur.ca>
>Reply-To: dakota-truck@buffnet.net
>To: <dakota-truck@buffnet.net>
>Subject: DML: Magnum head bolts!
>Date: Thu, 16 Nov 2000 09:36:35 -0600
>
>I was just putting the heads on my 5.2 magnum and got to wonder if I should
>have used sealant on the headbolts rather then engine oil! Does anyone
>know
>if the threaded bolt holes in the block go into the coolant passages?
>
>

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at
http://profiles.msn.com.

Next message: Ronald Wong: "RE: Viper/Dakota Map Modifier(build for 10 bucks)"
Previous message: Dakota31852@aol.com: "Re: Viper/Dakota Map Modifier(build for 10 bucks)"
Maybe in reply to: Robertsons: "Magnum head bolts!"
Next in thread: bernd@texas.net: "Re: Magnum head bolts!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:25 EDT