Without going through long strings of numbers again, the metric numbers are:
Bore=99.3 mm
Stroke=84 mm
6-cyl displacement=3.9012042 liters
8-cyl displacement=5.2016056 liters
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Ronald Wong
Sent: Friday, November 17, 2000 8:29 AM
To: dakota-truck@buffnet.net
Subject: DML: RE: Re: RE: 239, or 238?-- 238 1/2
Here we go off the beaten path again.
The 318 is a 5.2. A 5.2 (if it's truly a 5.2) when converted comes out to
be 317.304 which doesn't even round to 318. It rounds to 317. But suppose
it is a 318. If we convert the other way we come out with 5.212 liter
engine. So taking 75% of a 318 (if it is a 318) would get you to 238.5, but
converting 3.9 to cubic inches nets 237.978.
Pick your poison. To satisfy Bernd and co, we'll start at the basics like
he did. From the US side bore is 3.91 inches and the stroke is 3.31 inches.
3.91/2 = 1.955 inches, that's our radius, times itself = 3.822025 times 3.14
= 12.001158 times 3.31 (stroke) = 39.723832. That's the number of cubic
inches in one cyl. times 6 = 238.34299. That's rounded to 238.
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Andy Wittkamper
Sent: Friday, November 17, 2000 3:54 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: 239, or 238?-- 238 1/2
Actually, I got 238.5.
The 3.9 is a 6cyl. 318.
318/8= 39.75
39.75*6= 238.5
Sounds like some weird math, right? It works, anyway.
Andy Wittkamper
__________________________________
http://www.members.tripod.com/TiptonFFA
----- Original Message -----
From: "Ronald Wong" <ron-wong@home.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, November 17, 2000 1:01 AM
Subject: DML: RE: 239, or 238????
It's 237.9 so 238 is correct. The multiplier is 61.
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Chris Hannon
Sent: Thursday, November 16, 2000 9:46 PM
To: dakota-truck@buffnet.net
Subject: DML: 239, or 238????
I was looking in my '95 Dakota FSM. It says the 3.9L V6's are 238 cubic
inches. I know it's not a big difference, but it just seems weird that
the FSM would have 238 and everyone calls it a 239 (including me).
Anyone have any idea who's right?
Later,
Chris Hannon
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:26 EDT