you crazy bastard :~)
looks like it's time for the 8 3/4 rear to slide under there.
So what could you possibly tell the dealer, you pulled out of the grocery
store parking lot and your foot slipped off the pedal to fast?
be sure to clean the rubber off the wheel wells
ttyl
Scott Miller
----- Original Message -----
From: <WMBARRET@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, November 18, 2000 8:50 PM
Subject: DML: Went to VMP today, Snapped the rear end!!!!!!!
> Well, you knew it would happen, Something was gonna break when launching
at
> 3500 rpms with Hoosier, and pulling 1.88 60' times today!! Baawaaa haa
ha!!
> On my 6th run of the day, pulled it up to the lights, rev'd it to 3200
rpms,
> dumped the clutch, WHAAAAAAAAAAAM!!!! I didn't move an inch!!
> Instantaneous breakage, at first I'm thinking tranny, so I try another
gear,
> nothing, no gears work. Now I'm thinking rear end, yep, I broke a 9 1/4
rear
> end, OR did I???? My gut feel is I snapped an axle ??? Any clues
guys????
> I jacked the rear up, and put it in gear, rotated both rear wheels by
hand,
> and absolutely no driveshaft movement, so I know its either , Spider
gears,
> ring/pinion, or an axle. If its an axle, shouldn't I be able to pull it
out,
> Wheel and all, does anything else hold it in other than the C-clip????
> It broke so fast, and no forward movement at all, makes me think axle???
> Oh, well, the quest for 13's is put off until next year. Today I ran,
14.32,
> 14.42, 14.40, 14.31, and 14.37. I did run my fastest 1/8 mile ever 9.02 ,
> VMP is not a very fast track, I'm usually a tenth slower, or more.
> Off to the dealer tomorrow, I'll see what they have to say on Monday.
>
> Oh yea, Scott Miller, I know ;) YOU TOLD ME SO !!! hee heee!
>
>
> Matt Y2K-HEMI
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:28 EDT