That would be 45PSI on the Goodyear Eagle LS. Way too hard. they're just
rolling along on the center tread at that pressure. I'm not even sure the
side blocks were touching the ground at that pressure :-).
On the other hand, you would have been better off with your method if you'd
been driving an Explorer. I guess there is no right method, just whatever
works.
Rob S.
"Jeff Durling" <jdurling@mindspring.com> wrote in message
news:3A23113D.7A609A57@mindspring.com...
> I set all of them for 32psi on a 35 max psi tire. BTW,
> I've never set my tire pressure at the manufacture's rate but instead
always set
> it a what the tire maker recommends.
>
> Jeff Durling
> '01 4x2 QC SLT+
>
> Daniel Card wrote:
>
> > I don't if that's right for all 00's. My 00 QC's Tire and Handling
package
> > uses 31"x10.5" Wrangler AT/S.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:42 EDT