Clean IAC first. See if that cures the problem.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Eng, Ken
Sent: Monday, December 04, 2000 11:01 AM
To: dakota-truck@buffnet.net
Subject: DML: Dak dies after start up
Anyone ever have their Dak just die right after it starts up?
Starting on Saturday my 98 Dak would just die right after it would start up.
This has occurred after I had driven it and came back to start it again.
The engine would turn over with my key in the start position. After letting
go of the key, the engine would stumble and die in the run position. It
would start up again and stay running if I give it some gas. I checked my
battery and it has a full charge. My volt meter reads around the 14 volt
mark. I have a stock ignition.
TIA,
Ken
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:55 EDT