As soon as I feel that the box is ready...some testing on some preselected
users will be needed though.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
Subject: Re: DML: Good news and better news!
At 09:52 PM 12/20/00 -0600, you wrote:
> <snip>
>We put together a small box (4"Lx3"Wx1"H) with the POT and a small harness
>to the PCM to control the MAP (via TPS reference voltage) and the IAT (with
>the adjustable POT from 1K - 11K). It's still a little big for my taste
but
>there's no voltage "noise" and no interference from the MSD Ignition
system.
>It's really cool...adjust your IAT from 70 degrees to 180 degrees...have
the
>MAP send a high load signal when you want it to, with adjustable TPS and
MAP
>reference signals from 1.8v - 3.8v. (I'm not touching the Coolant Temp
>Sensor since that would affect your actual Temp gauge.)
>
Will it be offered to interested DMLers?
Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:05 EDT