Bernd,
Thanks for adding to the detective work! Ill keep digging as well!
Bruce
----- Original Message -----
From: <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, December 20, 2000 7:38 AM
Subject: RE: DML: 4.7L TB attn Bruce
>
> I contacted Mopar Techline and the Magnum Techline...neither one can
answer
> what the difference is between the 2000 and 2001 TB's. They (apparently)
don't
> have any of the specs.
>
> Bruce, i'm waiting for an answer from two of the local Dodge Techs that I
know
> to see if they have any insight on this.
>
> - Bernd
>
>
> > Even I have looked at it. Hold off until the modification is complete.
Then
> > you can get some real numbers.
> >
> > I have seen the difference before and after Matt a moded 68mm. He
extended
> > the shaft to redo the idle breathing and flow.
> >
> > -------------------------------------------
> > Steven St.Laurent
> > Test Engineer
> > Test Branch, GSD, MCTSSA
> >
> > -----Original Message-----
> > From: WMBARRET@aol.com [mailto:WMBARRET@aol.com]
> > Subject: Re: DML: 4.7L TB attn Bruce
> >
> > Part number for the 2000 65mm TB is 53013241AC
> > Part number for the 2001 68mm TB is 53013163AA list $215
> >
> > Bruce, have you confirmed the 2001 TB is a 68mm??
> > Just want to make sure before I fork over 200 bucks :)
> > Have you seen one???
> > Any 2001 owners out there that can confirm this.
> >
> > Matt Y2K-HEMI
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:05 EDT