Hmm, wonder if this can be done by any exhaust shop?
-Ryan
99 DA RC R/T
Hmm!
----- Original Message -----
From: "Hoegen" <hoegen@kersur.net>
To: <dakota-truck-moderator@twisted.twistedbits.net>
Sent: Thursday, December 28, 2000 5:57 PM
Subject: DML: Re: Re: Roll Pan Needed for 99 Dak! (Attn Chuck Robbins)
> They said they would create custom holes in the roll pan if I needed it.
> This is good for me, although my exhaust has euro style dual tips (3"), so
> the holes will be big. Currently the exhaust tips are just below the
stock
> bumper on either side of the licence plate....my guess is that they will
> have to be raised up some???
> "Ryan Stewart" <firebird@kymtnnet.org> wrote in message
> news:015f01c07076$7c0491e0$0193a8c0@Anywhere.com...
> > Kevin, they said they'd cut the hole sin the rollpan for5 the exhaust?
or
> > that they'll do it if the rollpan already has holes?
> >
> > Thanks.
> >
> > -Ryan
> > 99 DA RC R/T
> > Looking for a rollpan soon.
> >
> >
> > ----- Original Message -----
> > From: "Hoegen" <hoegen@kersur.net>
> > To: <dakota-truck-moderator@twisted.twistedbits.net>
> > Sent: Wednesday, December 27, 2000 7:57 PM
> > Subject: DML: Roll Pan Needed for 99 Dak! (Attn Chuck Robbins)
> >
> >
> > > Hey fellow DMLers,
> > > I was involved in an automobile accident today and damaged my rear
> > > bumper. When all is said and done, the auto shop said they would
replace
> > the
> > > stock bumper with a custom roll pan of my choosing! (insurance pays
the
> > > bill!!). With this in mind, I need to locate the right rollpan and
> quick.
> > >
> > > I currently have a dual catback setup which exits from the rear. The
> auto
> > > shop will do the necessary hole preparation to have the exhaust exit
> thru
> > > the rear of the roll pan. Can someone give me the ordering info for a
> roll
> > > pan which will work for my dakota?? Any and all help is
> > > appreciated...including name brand, part number etc. Because it's an
> > > insurance job, I need to get the info quick...that's why I have ask
all
> of
> > > you.
> > >
> > > ...Note to Chuck: Hey man I lost your email...I figure if noone else
can
> > > help, you probably know exactly the roll pan I need :-)
> > >
> > > Thanks all!
> > > Kevin
> > >
> > >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:09 EDT