Re: Re: Re: Re: Re: Roll Pan Needed for 99 Dak! (Attn Chuck Robbins)

From: Chad Evans (hemidak@Msn.com)
Date: Sat Dec 30 2000 - 01:24:33 EST


street scene offers roll pans that have duals coming out the back. they were
featured in an issue of sport truck. also i think that
www.profinish-proglass.com has some as well, not sure though. this is the
same place that has the shaker hood for daks

99 rc 318 flame red
HemiDak@msn.com

>From: "Hoegen" <hoegen@kersur.net>
>Reply-To: dakota-truck@buffnet.net
>To: dakota-truck-moderator@twisted.twistedbits.net
>Subject: DML: Re: Re: Re: Re: Roll Pan Needed for 99 Dak! (Attn Chuck
>Robbins)
>Date: Fri, 29 Dec 2000 19:52:04 -0500
>
>I know nothing about creating holes in Polyurethane, but I figured that the
>auto body guys were the best choice to ensure a nice "finished" look. I may
>well have to have the rear exhaust readjusted to ensure that they fit
>correctly thru the roll pan. I may even have to change exhaust tips as my
>current tips "each" have two 3" circular exits....makes the hole need quite
>big to fit them.
>
>""Ryan Stewart"" <firebird@kymtnnet.org> wrote in message
>news:01f801c071ae$648ec420$0193a8c0@Anywhere.com...
> > Hmm, wonder if this can be done by any exhaust shop?
> >
> > -Ryan
> > 99 DA RC R/T
> > Hmm!
> >
> > ----- Original Message -----
> > From: "Hoegen" <hoegen@kersur.net>
> > To: <dakota-truck-moderator@twisted.twistedbits.net>
> > Sent: Thursday, December 28, 2000 5:57 PM
> > Subject: DML: Re: Re: Roll Pan Needed for 99 Dak! (Attn Chuck Robbins)
> >
> >
> > > They said they would create custom holes in the roll pan if I needed
>it.
> > > This is good for me, although my exhaust has euro style dual tips
>(3"),
>so
> > > the holes will be big. Currently the exhaust tips are just below the
> > stock
> > > bumper on either side of the licence plate....my guess is that they
>will
> > > have to be raised up some???
> > > "Ryan Stewart" <firebird@kymtnnet.org> wrote in message
> > > news:015f01c07076$7c0491e0$0193a8c0@Anywhere.com...
> > > > Kevin, they said they'd cut the hole sin the rollpan for5 the
>exhaust?
> > or
> > > > that they'll do it if the rollpan already has holes?
> > > >
> > > > Thanks.
> > > >
> > > > -Ryan
> > > > 99 DA RC R/T
> > > > Looking for a rollpan soon.
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Hoegen" <hoegen@kersur.net>
> > > > To: <dakota-truck-moderator@twisted.twistedbits.net>
> > > > Sent: Wednesday, December 27, 2000 7:57 PM
> > > > Subject: DML: Roll Pan Needed for 99 Dak! (Attn Chuck Robbins)
> > > >
> > > >
> > > > > Hey fellow DMLers,
> > > > > I was involved in an automobile accident today and damaged my
>rear
> > > > > bumper. When all is said and done, the auto shop said they would
> > replace
> > > > the
> > > > > stock bumper with a custom roll pan of my choosing! (insurance
>pays
> > the
> > > > > bill!!). With this in mind, I need to locate the right rollpan and
> > > quick.
> > > > >
> > > > > I currently have a dual catback setup which exits from the rear.
>The
> > > auto
> > > > > shop will do the necessary hole preparation to have the exhaust
>exit
> > > thru
> > > > > the rear of the roll pan. Can someone give me the ordering info
>for
>a
> > > roll
> > > > > pan which will work for my dakota?? Any and all help is
> > > > > appreciated...including name brand, part number etc. Because it's
>an
> > > > > insurance job, I need to get the info quick...that's why I have
>ask
> > all
> > > of
> > > > > you.
> > > > >
> > > > > ...Note to Chuck: Hey man I lost your email...I figure if noone
>else
> > can
> > > > > help, you probably know exactly the roll pan I need :-)
> > > > >
> > > > > Thanks all!
> > > > > Kevin
> > > > >
> > > > >
> > > >
> > >
> > >
> >
>
>
>

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:09 EDT