<< I checked the ATF level, and it was overfilled a bit. Could this have
something to do with the little "leak" I'm noticing? Again, this is noticed
at the front of the transmission, on the bottom. Am I correct in saying the
convertor housing?
Thanks Again,
william >>
Just a quick note, yes the over-fill could have caused this. If you ever
take the tranny out, look at the top fo the front pump assembly. There is a
vent hole there. If the fluid is too high and it gets up around that vent,
it will spill out till it is at a more normal level. Be sure to drain it
back down to normal levels before it damages the tranny.
Will
96 Paxton huffed 408 Dakota
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:26 EDT