I'm using the stock 318 harness with a 92-93 Ram HP-PCM Mopar computer. I am
using 24# injectors, they do run a little rich for about 360 hp, I had used
30# injectors before and worked just as well. I think that the 30# would
work better with a 4bbl-tb and a little bigger cam. I have run the 30# with
a 318 computer and it ran OK, I was running the same times with both. As a
warning to you, I have gone through two 360 PCM's in the past year. I am not
sure if its just bad luck or something else.
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph
360ci, 5-spd, 4.11 LS(8 3/4 coming soon), Cowl-induction
(A new E-body 8 3/4 [3.90 SG] has been built by Reider Racing)
----- Original Message -----
From: "Chris Hannon" <cannon@kansas.net>
To: <dakota-truck@buffnet.net>
Sent: Sunday, January 07, 2001 9:12 PM
Subject: DML: Attn: Mark Kuzia and Austin ('95 360 guys!)
> I'm about ready to wrap up the work on the 5.9L Magnum and have a few
> questions for you guys.
>
> What computer and wiring harness are you running with your trucks?
>
> I'm debating on whether or not to get a Mopar Performance computer for a
> '94-'95 5.2L Dakota and run 24# injectors or get a computer for the
> '94-'95 5.9 Ram. Would a computer from a Ram work in a Dakota, do you
> think? I'm presuming that I'll still need 24# injectors since the engine
> is getting "souped" up.
>
> The engine I bought, which came out of a '95 Ram 1500, was a liftout
> which had everything including the wiring harness. I'm wondering if I
> need to get a different wiring harness...
>
> Also, how are you guys cooling your engine (radiator, fan)?
>
> Thanks for the help,
> Chris Hannon
> '95 Dakota Sport RC SB 5 spd 3.9:1
> 16.44 @ 85 MPH 1/4 mile (not too shabby for a little ole V6!)
> 360 work in progress...still gotta get computer, clutch, driveshaft,
> tranny
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:31 EDT