Thanks for the info and quick response Mark! Do you think, maybe, that the problem you're having with the PCM's is because they aren't for a Dakota? I don't know if that'd matter....
Later,
Chris Hannon
>
> ------------------------------
>
> Date: Sun, 7 Jan 2001 21:49:06 -0500
> From: "Mark Kuzia" <flyboy01@mediaone.net>
> Subject: DML: Re: Attn: Mark Kuzia and Austin ('95 360 guys!)
>
> I'm using the stock 318 harness with a 92-93 Ram HP-PCM Mopar computer. I am
> using 24# injectors, they do run a little rich for about 360 hp, I had used
> 30# injectors before and worked just as well. I think that the 30# would
> work better with a 4bbl-tb and a little bigger cam. I have run the 30# with
> a 318 computer and it ran OK, I was running the same times with both. As a
> warning to you, I have gone through two 360 PCM's in the past year. I am not
> sure if its just bad luck or something else.
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph
> 360ci, 5-spd, 4.11 LS(8 3/4 coming soon), Cowl-induction
> (A new E-body 8 3/4 [3.90 SG] has been built by Reider Racing)
>
> - ----- Original Message -----
> From: "Chris Hannon" <cannon@kansas.net>
> To: <dakota-truck@buffnet.net>
> Sent: Sunday, January 07, 2001 9:12 PM
> Subject: DML: Attn: Mark Kuzia and Austin ('95 360 guys!)
>
> > I'm about ready to wrap up the work on the 5.9L Magnum and have a few
> > questions for you guys.
> >
> > What computer and wiring harness are you running with your trucks?
> >
> > I'm debating on whether or not to get a Mopar Performance computer for a
> > '94-'95 5.2L Dakota and run 24# injectors or get a computer for the
> > '94-'95 5.9 Ram. Would a computer from a Ram work in a Dakota, do you
> > think? I'm presuming that I'll still need 24# injectors since the engine
> > is getting "souped" up.
> >
> > The engine I bought, which came out of a '95 Ram 1500, was a liftout
> > which had everything including the wiring harness. I'm wondering if I
> > need to get a different wiring harness...
> >
> > Also, how are you guys cooling your engine (radiator, fan)?
> >
> > Thanks for the help,
> > Chris Hannon
> > '95 Dakota Sport RC SB 5 spd 3.9:1
> > 16.44 @ 85 MPH 1/4 mile (not too shabby for a little ole V6!)
> > 360 work in progress...still gotta get computer, clutch, driveshaft,
> > tranny
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:31 EDT