That's a portable unit. It gets moved all over Irvine. I haven't seen it
as of late, though I'm not always down Irvine Ctr Dr. There is more than
one unit however, so you may want to check around.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Woodruff, Jason P
Sent: Monday, January 08, 2001 11:54 AM
To: DML (E-mail)
Subject: Re: DML: white face gauges
Hey Will,
I just found from the calendar you live in Laguna Hills. I lived there all
last year, off Laguna Hills Dr. and Moulton. I can't believe I don't
remember seeing a truck exactly like mine running around.
Anyways, if I remember right there is one of those radar "signs" on Irvine
Center Drive going toward Irvine from Laguna. Speak up Ron if I'm not
right. That should at least help you determine if your spedo is accurate.
Jay W
4.7L Auto Sport+ C.C. 2wd Black
Mods Profile page at
http://www.twistedbits.net/WWWProfile/dakota/Re5X8z5la@Ix2/profile.htm
Date: Sat, 06 Jan 2001 21:24:47 -0800
From: "William H. Hiatt III" <william@hiatt.net>
Subject: DML: white face gauges
Well, THESE THINGS ARE A BITCH TO install! I need some help, where do most
of the gauges normally sit? I know the voltage = 14, oil should = 40
(straight up and down) (at idle) temp = varied, speed = varied, rpm = I
idle on the mark above 500. I have a 4.7l. Gas gauge I'll just leave undone
until my gas light comes on. MPH is being a bitch. Any tips for getting
these things set right?
william
For the speedometer, I found a radar "sign" on the side of the road,
drove at it with it indicating 30 MPH and put the needle on in the right
spot.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:31 EDT