My was coated on the outside but it had a black coating on the inside. I
don't know what it was coated or just the piping but still felt smoothed.
One item John's needs to do is to add a bracket where the hole post from the
stock air intake.
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Kyle Kozubal
Sent: Tuesday, January 16, 2001 8:09 PM
To: dakota-truck@BUFFNET.NET
Subject: Re: DML: Intake Tube Question
> Remember John from Intense Performance coats his intake with Ceramic.
>>>
Are the IP ones ceramic coated on the inside and outside?
>From the info John Bell(fellow DMLer) gave:
"Don't do the inside - you want laminar air flow inside the tube, the
coating
will cause turbulence (not a good thing as a general rule)."
Thanks again John!
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:36 EDT