Have your CV boots checked.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of DONKEYJAKE@aol.com
Sent: Thursday, January 25, 2001 1:55 AM
To: dakota-truck@buffnet.net
Subject: DML: Rubbing from front end..part II
I sent my truck in to a shop since I couldn't find anything unusual and
didn't have the time to tear stuff apart. They call me at work and say that
my rotors need resurfaced, new pads and they were going to bleed the brakes
while they were at it. I think cool, that could be the problem since these
rotors suck, so I agreed for them to proceed.
So $175 later I'm driving home and feel the same rubbing in the front end.
Sh*t. I drive around braking a little to work the pads in. Still have the
RUB. It's real speratic when it happens. Mostly does it on turns but has
been
felt driving straight. I can feel it kind of fluctuate like it's turning
with
the wheel or axle. It also sometimes feels like a slight popping or
bubbling.
Hard to describe. Any suggestions help appreciated.
JAKE
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:42 EDT