Now boys!............
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Bernd D. Ratsch
Sent: Thursday, January 25, 2001 8:52 PM
To: dakota-truck@buffnet.net
Subject: RE: re:Subject: DML: Wanting to stall
Because it can only compensate so much ya twit. I can pull a vacuum hose
off of my '69 Javelin and it idles just fine if I start to restrict the carb
opening (choke it). DUH! ;)
The computer will see a lean condition and....again....will try to
compensate. SHEESH...@#$! Rednecks! (Hehehehe)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
Subject: RE: re:Subject: DML: Wanting to stall
then why do my truck always idle ~1000 rpm when I unhook a vac. line?? huh
mr smarty pants?? huh??? :)
______________________
Jon Smith--Raleigh, NC
-It would...but the PCM would try to compensate by either adding fuel and/or
-closing up the IAC port. (Don't ya just love computer controls on stuff
-like that?!?)
-
-- Bernd
-
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:43 EDT